Good evening,

Are the first gen MI-1200 units supported [serial number begins with 1060xxxxxxxx]? I have tested version 0.60 and 0.67 using (ESP32 with NRF24L01+) and (ESP8266 Wemos D1 V4 with NRF24L01+ and NRF24L01+ PLUS – PA LNA SMA antenna).

Seems the NRF24 units are detected. In the Ahoy software it shows -> "is connected" datarate -> "250 kbps". Tested the ESP32 and 8266 about 5 meters from two inverters but there are never any RX success packets. Tried power levels low up to high. the NRF24L01+ has a 100uf cap soldered to it and the NRF24L01+ PLUS – PA LNA SMA unit has a converter board with caps that takes 5V down to the required 3.3.

I see in the serial console when I add an inverter -> "I: added inverter (3rd Gen) 1060xxxxxxxx"